/ /

Add points to recognition programs

Updated 49 minutes ago

Overview

You add points to awards at the program level, on the Rewards step of the program wizard. Every award in the program shares the program's point settings and budget. Recipients can redeem the points they receive in the reward store.

This article covers how to turn on points, choose the point values givers see, connect a budget, set monthly allowances, and turn points off again.

Before you start

Check these settings before you add points to a program.

  • Rewards and Gifting are enabled. Go to Manage > Recognition > General settings and confirm both cards show Enabled.

  • The exchange rate is set. The Exchange rate and currencies card shows how many points equal one unit of currency, for example 10 points = 1 USD.

  • The Gifting options card shows the default point values givers can pick. Each program starts with these defaults, and you can change them per program.

image.png

You also need an active or scheduled budget. Go to Manage > Recognition > Budgets and check that at least one budget shows the Active status. To create one, see "Set up your rewards budget."

image.png

Note: Only an active or scheduled budget can fund points. A program with points turned on must have a budget selected before you can move past the Rewards step.

Add points to a program

Turn on points from the Rewards step of the program wizard. You can do this when you create a program or when you edit an existing one.

  1. Go to Manage > Recognition > Programs.

  2. To create a program, click Create program and choose a program type. To update an existing program, click the more options icon (...) on the program card and select Edit details.
    image.png

  3. Click Next to move from the Awards step to the Rewards step.

  4. Turn on Allow gifting with awards. The Gifting options and Budgets sections appear.

  5. Under When gifting points, display options as, keep the default values from General settings, or select Custom options to set values for this program only.
    image.png

When you select Custom options, edit each value with the minus and plus buttons, remove a value with the X icon, or click Add option to add another one.

image.png

Note: A program can have up to 8 custom options. Each option must be a positive number, so a value of 0 shows the error "Only positive values are supported."

  1. Under Budgets, click Browse next to Points budget.
    image.png

  2. Select a budget and click Save. Each program uses one budget.
    image.png

The selected budget appears in the Points budget box with its balance, status and refresh schedule. To pick a different budget, click the X icon and browse again.
image.png

  1. Set up points for the program type. For Peer-to-peer and Spot programs, set allowances in the Allowances section. See "Point setup by program type" and "Set allowances" below.

  2. Click Next to go to Schedule, then click Next again to go to Review.

  3. Check the Rewards, Budgets and Allowances sections. Click Edit on any section to go back and change it.
    image.png

  4. Click Update to save the changes to an existing program. For a new program, save it from the Review step to create it.

Tip: The line under Gifting options shows the exchange rate, for example 10 points = 1 USD, so you can check what each value is worth.

Point setup by program type

How points work depends on the program type. The Rewards step shows different settings for each type.

Program type

How points work

What you set on the Rewards step

Peer-to-peer and Spot

Givers choose a point value when they give recognition, up to their monthly allowance.

Gifting options, budget and allowances

Recurring

Givers choose a point value when they give the award. Points come directly from the budget. There are no allowances.

Gifting options and budget

Service anniversary

Points are given automatically on each work anniversary. Points come directly from the budget.

Award valuation and budget

Recurring programs

A Recurring program shows the same Gifting options and Budgets sections as a Peer-to-peer program, but no Allowances section.

image.png

Service anniversary programs

Service anniversary programs use Award valuation in place of Gifting options, because no one picks a value when the award goes out.

  1. Turn on Allow gifting with awards.

  2. Under Award valuation, select Award custom points to the receivers and enter the default value for all anniversaries. Select Award 0 points to the receivers if you want anniversaries to go out without points.

  3. Under Awards, change the Points value for any specific year to override the default. Click Show more to see later years.

  4. Under Budgets, select the points budget.
    image.png

Note: You can have only one Service anniversary program at a time. When one already exists, the Service anniversary option is unavailable on the Create program page.

Set allowances (Peer-to-peer and Spot)

An allowance is the number of points a person can give per month in a program. The Allowances section appears on the Rewards step after you select a budget. You can combine three types.

Allowance type

Who gets it

Example

Audience allowance

Everyone in a selected audience gets the same amount.

200 points per month for Engineering

Manager allowance

Every manager gets a base amount plus an amount per direct report.

100 base + 50 for each of 5 reports = 350 points per month

Individual user allowance

Specific people you name, such as executives or recognition champions.

500 points per month for a CHRO

Add an audience allowance

  1. In the Allowances section, click Add audiences.

  2. Search for an audience, or turn on All organization, then select the checkbox for each audience you want.

  3. Click Done.
    image.png

  4. Enter the number of points in the Points per member (Refreshes monthly) column for each audience.

Add a manager allowance

Under Managers, enter a Base amount that every manager gets, and a Per direct report amount that multiplies by each manager's number of direct reports.

Add an individual user allowance

  1. Click Add users.

  2. Search for and select each person, then click Done.
    image.png

  3. Enter the number of points in the Points (Refreshes monthly) column for each person.

After you add allowances, the section shows each audience, the manager amounts and each named person with their monthly points.

image.png

Warning: Changing the program's participants on the Awards step resets the audiences and users in the Allowances section. Re-add them if needed.

How allowances work

  • If a person qualifies for both an audience allowance and a manager allowance, they get the higher amount. Allowances don't stack.

  • An individual user allowance always overrides audience and manager allowances.

  • An allowance of 0 is valid. That person can still give awards, just without points.

  • Allowances reset monthly, regardless of the budget's recurrence. Unused points don't carry over.

  • New members of an eligible audience receive their allowance within about 24 hours.

Tip: Hover over the info icon next to Base or Per direct report to see what each manager amount does.

How points are limited when giving

When an employee gives recognition, the most they can give is the lower of their remaining allowance and the remaining budget. Point options above that amount are greyed out.

When a giver recognizes several people at once, the chosen value goes to each recipient. The total equals the value multiplied by the number of recipients.

Example: The program uses the default options of 25, 50, 100 and 500 points. A giver has 60 points left this month. The 25 and 50 options are available, and the 100 and 500 options are greyed out. If the giver picks 25 points for two people, the giver uses 50 points.

Givers see the options under Gift points (Optional) after they select an award in the Give recognition dialog. When the giver has no points left, every option is greyed out and the dialog shows how many points are available.

Note: Gift points are optional, so a giver can still give the award without points. Only the people recognized, their managers and app admins can see gifted points.

Remove points from a program

  1. Go to Manage > Recognition > Programs, click the more options icon (...) on the program card and select Edit details.

  2. Click Next to go to the Rewards step.

  3. Turn off Allow gifting with awards. The Gifting options, Budgets and Allowances sections disappear.
    image.png

  4. Click Next until you reach Review, check that Allow gifting with awards shows No, then click Update.

The program's awards keep working without points, and points already given aren't affected.

Warning: After you turn off gifting, the Review step no longer lists a budget or allowances for the program. If you turn gifting back on later, check the budget and allowances before you click Update.

Was this article helpful?
Subscribe to receive updates on this article