/ /

Edit or update an award

Updated 45 minutes ago

Overview

Learn how to edit awards in a recognition program. You can change an award’s details, limit who can give or receive it, remove it from a program, and turn it off or on. It also covers the program settings that apply to every award in a program, such as recipients, rewards, and schedules.

The steps differ slightly for each program type. Peer-to-peer, spot, and recurring awards are edited one by one inside their program. Service anniversary awards are edited through the single service anniversary program.

How award editing works

Awards live inside programs, so you edit an award from its program’s edit flow. When you open a program to edit it, the flow has four steps.

  • Awards lists the program details, participants, and the awards in the program. Each award has an edit icon and a remove icon.

  • Rewards holds gifting, point options, budgets, and allowances.

  • Schedule holds the run dates and, for recurring programs, the award frequency and nomination dates.

  • Review shows a summary of every setting. Click Update here to save your changes.

Saving an award in its edit window only stages the change. Nothing is saved to the program until you click Update on the Review step.

Note: If you click Cancel at any point before Update, all changes made in that session are discarded, including awards you edited or removed.

Open a program to edit

  1. Go to Manage > Recognition > Programs.

  2. To find the program, search by name or click Program type and select the type you want to see.

image.png

The Program type filter has four options: Peer-to-peer, Spot, Recurring, and Service anniversary. You can also filter by Program status, Award status, Audience, and User.

image.png

  1. On the program card, click the more options icon (…) and select Edit details.

image.png

The program opens on the Awards step.

Tip: The more options icon next to each individual award doesn’t include an edit option. To edit an award, always open its program with Edit details.

Edit a peer-to-peer award

Peer-to-peer awards live inside a peer-to-peer program. Use these steps to change an award’s name, description, badge, giving limit, company values, expertise, or participants.

  1. Open the peer-to-peer program with Edit details. See “Open a program to edit” above.

  2. Scroll to the Awards section and click the edit icon next to the award.

image.png

  1. In the Edit peer-to-peer award window, update the Award name and Award description as needed. Under Badge, select a different badge, click Show more to see more badges, or upload your own image.

image.png

Note: Uploaded badge images must be at least 200 x 200 px, have no transparency, and be 2 MB or smaller. Accepted file formats are PNG, JPG, and SVG.

  1. Under Giving limit, choose how often the award can be given.

    • No limit lets participants give the award any number of times.

    • Limit per giver sets how many times each person can give the award.

    • Limit total sets the maximum number of times the award can be given in total.

For Limit per giver or Limit total, enter the number in Times given and choose a Frequency of Weekly, Monthly, Quarterly, or Yearly.

image.png

  1. Under Details, update the company values and expertise.

    • Company Values suggests values that givers can add when they give the award.

    • Allow expertise lets givers select expertise when they give the award. Selected expertise is added to the recipient’s profile.

To narrow who can give or receive this award, click Limit participants.

image.png

  1. Under Participant limits, add or remove audiences for Who can give this award and Who can receive this award.

image.png

Warning: Award participants must stay within the program’s audience. To widen who can give or receive an award, first update Who can give awards and Who can receive awards in the program’s Participants section.

  1. Click Save to close the award window.

  2. Click Next to move through the Rewards and Schedule steps, then click Update on the Review step.

image.png

Remove an award from a program

To remove an award, open its program with Edit details and click the remove icon (X) next to the award in the Awards section. The award disappears from the list right away, without a confirmation message. The removal is saved when you click Update on the Review step.

Alert: Check the award name before you click the remove icon. If you remove the wrong award, click Cancel before Update to discard the change.

Edit a spot award

Spot awards live inside a spot program. The spot award window has the same name, description, badge, giving limit, company values, expertise, and participant settings as a peer-to-peer award, plus guidance for givers and an award author.

  1. Open the spot program with Edit details.

  2. In the Awards section, click the edit icon next to the award.

  3. In the Edit spot award window, update any of the following.

    • Award name, Award description, and Badge

    • Guidance for award givers, which is shown only to the giver when they give the award

    • Giving limit

    • Participant limits, including who can give and who can receive this award

    • Company Values and Expertise

Under Award author, choose who appears as the author of the award post.

  • Award giver is the person giving the award. This is the default.

  • Selected person shows a specific user. Select the user from the list.

  • No author shows no author on the post.

  • Intranet name shows your intranet’s name.

  • Custom shows a name you enter in Enter custom author name.

image.png

  1. Click Save, then click Next through the steps and click Update on the Review step.

Change who can receive a spot award

Recipients for a spot program are set at the program level, in the Participants section of the Awards step. Open Who can receive awards and select one of these options.

  • Award giver’s direct reports

  • Award giver’s full ladder reports

  • All employees

  • Custom

image.png

Change when a spot award runs

Run dates are set at the program level on the Schedule step. The start date of a running program can’t be changed. To end the program on a set date, turn on End date and choose the date.

image.png

Tip For a seasonal award, set an end date on its program so the award stops automatically.

Edit a recurring award

Recurring awards are given on a schedule, such as every month, with nominations that help givers pick a winner. You can edit recurring awards at any time, including partway through a cycle.

  1. Open the recurring program with Edit details.

  2. In the Awards section, click the edit icon next to the award.

  3. In the Edit recurring award window, update the award name, description, badge, guidance for award givers, company values, expertise, and award author.

  4. To change participants for this award, click Limit participants. You can update Who can give this award, Who can receive this award, Who can nominate others for this award, and Nomination anonymity.

    • Anonymous hides nominators’ identities from award givers. Department information stays visible.

    • Visible lets award givers see who made each nomination.

image.png

Note: The Allow nominations setting is controlled by the program. To turn nominations on or off, change Allow nominations in the program’s Participants section.

  1. Click Save.

  2. To change the schedule, click Next until you reach the Schedule step. Then update any of the following.

    • Run dates, including the time zone and an optional end date

    • Start & end on weekdays only, which moves occurrences that fall on a weekend to the following Monday

    • Frequency of Monthly, Quarterly, or Annually. For annual awards, you can turn on Align with start of fiscal year.

    • Nominations open and Nominations close dates

    • Awards overdue date, such as After nominations close or No overdue date

image.png

The Award occurrence table below these settings previews the nomination open, nomination close, and overdue dates for each cycle.

  1. Click Next, review your changes, and click Update.

Note: Frequency and fiscal year alignment apply to every award in the program.

How edits affect the current cycle

When you edit an award during a cycle, you may be asked whether the change applies to future cycles only, or to the current cycle and future cycles. This applies to changes such as these.

  • Nomination open and close dates

  • Due and overdue dates

  • Who can nominate and who can win

  • Eligible audiences

If you change fiscal or date settings during a cycle, the active cycle is realigned so that today’s date falls within a valid award period. Closed cycles stay closed, and future cycles are recalculated from the new settings.

Warning: Before you confirm, read the message that explains how the current and future cycles will change.

View a recurring award’s history

To see past cycles for a recurring award, go to Manage > Recognition > Programs, click the more options icon (…) next to the award, and select View award history.

Change rewards and allowances

Point options, budgets, and allowances are set on the program’s Rewards step and apply to every award in the program. Open the program with Edit details and click Next to reach the Rewards step.

  • Allow gifting with awards lets givers add points when they give an award.

  • Gifting options sets the point choices givers see, either Points – 25, 50, 100, 500 or Custom options.

  • Budgets sets the points budget that funds giving allowances.

image.png

Under Allowances, set how many points participants can give each month.

  • Audience sets Points per member for each audience.

  • Managers sets a Base allowance plus an amount Per direct report.

  • Add users sets individual allowances. Individual allowances replace any other allowance granted to those users.

image.png

Warning: Changing a program’s participants resets the audiences and users in Allowances. Re-add them after you change participants.

Edit the service anniversary program

Your organization has one service anniversary program. Edit it to change the default anniversary award or individual milestone years. You can’t create a second service anniversary program.

  1. Go to Manage > Recognition > Programs, filter Program type by Service anniversary, and open the program with Edit details.

  2. On the Awards step, update Who can receive awards if needed.

  3. Under Details, update the defaults that apply to every anniversary.

    • Award name is fixed and is also used as the program name.

    • Award message can use the Default message or a Custom one. In a custom message, use <fullName> or <firstName> for the recipient’s name, <year> for the number of years (for example, 5), and <milestone> for the ordinal (for example, 5th).

    • Award author can be Intranet name (the default), Selected person, Custom, or No author.

image.png

Select a default Badge. The selected badge is used for all anniversaries, and you can customize each year’s badge later. You can also add an optional Program description.

  1. Under Award schedule, choose which anniversaries to recognize.

    • All recognizes every anniversary year.

    • Custom recognizes only the years you list, separated by commas, for example 5, 10, 15, 20, 25.

image.png

  1. To customize a single anniversary year, click the edit icon next to that year. Click the preview icon to see how the award post looks.

image.png

In the edit window for that year, turn on Customize for Award message, Award author, or Badge, and change the setting. The preview at the top updates as you edit. Click Save.

image.png

  1. Click Next to open the Rewards step. Under Award valuation, select Award 0 points to the receivers or Award custom points to the receivers and set the default value.

To set different points for a specific year, change the value next to that year in the Awards table. To remove points from one year, set that year to 0.

image.png

Note: The Rewards step is available only when your organization uses Recognition and Rewards.

  1. Click Next to open the Schedule step. Awards are sent at about 9:00 AM in each recipient’s time zone. Turn on Recognize retroactively to apply the award to past service anniversaries.

image.png

Alert: Recognize retroactively can’t be turned off after it’s turned on. Retroactive anniversaries don’t appear in feeds, recipients aren’t notified, and no points are awarded.

  1. Click Next, review your changes, and click Update.

Changes apply to anniversaries going forward. Awards that were already delivered don’t change.

Turn an award or program off or on

Deactivate an award

You can turn off a single award without changing the rest of the program. Go to Manage > Recognition > Programs, click the more options icon (…) next to the award, and select Deactivate award.

image.png

A deactivated award is hidden from the giving flow. Recognition posts that already used the award stay on feeds and profiles.

End, reactivate, or archive a program

To stop every award in a program, click the more options icon (…) on the program card and select End program. When a program is inactive, its menu shows Activate and Archive. Awards in an inactive program show Archive award in their menu.

image.png

Warning: If a program is deactivated or expires, all its awards stop. Reactivating the program doesn’t turn individually deactivated awards back on, so reactivate those awards yourself.

Things to know

  • Award participants must stay within the program’s audience. Edit the program’s participants first to widen who can give or receive an award.

  • Point options, budgets, and allowances are set on the program’s Rewards step, not in the award window.

  • Changes aren’t saved until you click Update on the Review step.

  • Keep award names unique across programs so employees can tell awards apart.

Was this article helpful?
Subscribe to receive updates on this article